Xante Colour ScreenWriter, User Manual

Page: 43 / 446

__________________________________________ Installation 2-13
Note: The OPC belt has white powder on it for lubrication.
Do not try to remove this powder.
Protective Sheet
Belt Cartridge
Tension
Release Pin
Tension
Release Pin
Fig. 2.14 Remove the Tension Pins and Protective Sheet
4. Hold the OPC cartridge over the printer, aligning the
cartridge’s side tabs with the printer’s OPC guides (fig. 2.15).
Guide
OPC Guide
Gear
Fig. 2.15 Align the OPC Cartridge over the OPC Guides
5. Lower the cartridge gently into the printer until you feel a
slight resistance as the cartridge’s gear engages with the gear
in the printer.
6. Close the OPC guides by pushing them toward the back of the
printer and down (fig. 2.15).