Xante Colour ScreenWriter, User Manual

Page: 316 / 446

10-6 Options bb __________________________________________
4. Remove the toner cartridges and oil bottle from the printer. See
“Removing and Installing a Toner Cartridge” and “Installing
or Replacing the Fuser Oil Bottle” in chapter 2 for details.
5. Align the printer squarely over the LFU and lower the printer
onto the LFU alignment posts (fig. 10.4).
Warning! The printer weighs approximately 101 lbs (46 kg)
without toner, cassettes, and media installed.
Always
have two people lift the printer by the recessed grip
areas on the bottom sides.
Fig. 10.4 Set the Printer on the LFU(s)
6. Attach the printer to the LFU. To do this
a. Slide the LFU connector cover down until its top tab is
free of the printer and then lift the cover out (fig. 10.5).
Save this cover in a safe place.
Back
Tab
LFU Connector Cover
Left Side
Fig. 10.5 Remove the LFU Connector Cover