Xante Colour ScreenWriter, User Manual

Page: 320 / 446

10-10 Options bb __________________________________________
9. Adjust the two anchor feet (on the right side of the LFU at the
front and back) by rotating them until the printer is level (fig.
10.10).
Anchor
Feet
Anchor Foot
Fig. 10.10 Level the Printer
If two LFUs are installed, adjust the feet on both the upper and
lower feeder.
10. Install the LFU cassette(s) (fig. 10.11). To do this
a. Pull out the two LFU guide rails (one on the left and one
on the right ) until they stop.
b. Align the leading edge of the cassette with the guide
rails and gently slide the cassette into the rails until it
stops about half way into the LFU.
c. Adjust the media length and width guides for the
media’s size and load media into the cassette.