Xante Colour ScreenWriter, User Manual

Page: 129 / 446

___________________________________________ PC Setup 4-25
1. Select the
SETUP:I/F
menu.
2. Select the menu for the printer interface connected to your
computer (
RS232, PARALLEL, LINEPRINTER,
or
NOVELL PRNTSRV
).
3. Select the
ENABLE
menu. Then, select
YES
.
4. Press the Reset key until
READY/IDLE
displays.
See “Interface Control” in chapter 6 about using the Interface
configuration menus, chapter 5 about configuring the Ethernet
options, and “XANTÉ Command Center” later in this chapter about
configuring communication for that utility.
PDFs Folder
This folder contains the PDF (Printer Description File) for your XANTÉ
printer. QuarkXPress versions prior to 3.3.2 require this file in addition
to the PPD. Use this PDF (XTCSW_6.PDF) to ensure the highest
quality output from your printer and QuarkXPress.
XANTÉ Utilities Installer loads the QuarkXPress PDF. To load this
PDF manually
1. Load and configure the Adobe PostScript printer driver and
your printer’s PPD following instructions in “Adobe PostScript
Printer Drivers” earlier in this chapter.
2. Copy the XTCSW_6.PDF from the PDFs folder to the Xpress:
PDF directory.
a. Select Start: Programs: Windows Explorer. Then, go to
the drive with the XANTÉ Utilities CD-ROM.
b. Locate and open the XCSW_UTILS: PDFs folder.
c. Select and drag the XTCSW_6.PDF file into the
C:\Xpress\Pdf folder.