Xante Colour ScreenWriter, User Manual

Page: 46 / 446

2-16 Installation bb _________________________________________
Installing or Replacing the Cleaning
Roller
The cleaning roller usually needs replacing after printing
approximately 12,000 single-sided pages at 5% coverage.
1. Turn off the printer if you are replacing the cleaning roller and
the printer is on.
2. Open the printer’s top cover if it is closed (fig. 2.13).
3. Open the two cleaning roller locks (fig. 2.16).
4. Remove the old cleaning roller if it is in the printer.
5. Align the new cleaning roller as shown in figure 2.18 and
lower it into place.
Cleaning Roller
Roller Tension
Lever
Roller Tension
Lever
Fig. 2.18 Install the Cleaning Roller
6. Close the two cleaning roller locks (fig. 2.16). Then, close the
printer’s top cover.