Xante Colour ScreenWriter, User Manual

Page: 289 / 446

_________________________ Maintenance and Specifications 9-23
Replacing the Ozone Filter
The ozone filter should be replaced once a year. If it is not replaced
in a timely manner, a noticeable ozone odor occurs.
Warning! Inhaling excess ozone gas may cause permanent
respiratory system damage. Always replace the ozone
filter at least once a year.
To replace the ozone filter
1. Turn the printer off.
2. Remove the ozone filter cover by sliding it straight out to the
side until its two securing tabs are free; then, lift the cover off
(fig. 9.27).
Back Cover
Filter Cover
Securing Tabs
Ozone Filter
Large Tab
Filter Cover
Small Tabs
Fig. 9.27 Replace the Ozone Filter
3. Remove the old filter from its cover by pulling the large tab
out slightly and angling the two smaller tabs free (fig. 9.27).