Xante Colour ScreenWriter, User Manual

Page: 361 / 446

_____________________________________ Troubleshooting 11-23
Horizontal banding appears on my output.
• Vibration can damage the OPC belt
cartridge causing the belt to rotate unevenly.
Replace the cartridge. See “Removing or
Installing an OPC Belt Cartridge” in chapter
2.
Horizontal white banding causing part of the image to disappear.
1
• Make sure that the transfer unit is properly
installed and the transfer roller lock lever is
closed (fig. 9.3).
• The transfer unit may be damaged. Replace
it. For transfer unit replacement, contact
XANTÉ; see “Technical Support” at the end
of this chapter.
Toner stains appear on my output.
• Toner stains are usually due to loose toner
inside the printer. Clean it. See “Cleaning
the Printer” in chapter 9.
• Check the toner waste pack for damage and
replace it if necessary. See “Replacing the
Toner Waste Pack” in chapter 9.
• One of the toner cartridges may have debris
on its developer roller. Remove the cartridge
and clean its roller surface by gently wiping
it off with a dry, lint-free cotton cloth. Use
the white gear on the end of the cartridge to
rotate the roller to reach all sides.
• Check the toner cartridge(s) for damage and
replace if necessary. See Removing and
Installing a Toner Cartridge” in chapter 2.