Xante Colour ScreenWriter, User Manual

Page: 124 / 446

4-20 PC Setup bb __________________________________________
a. In the PostScript output format box, select PostScript
(optimized for speed) if you have a Pentium processor. If
not, select PostScript (optimized for portability-ADSC).
b. Under PostScript header, select Download header with
each print job.
c. Under PostScript timeout values, make sure the settings are
• Job timeout: 0
• Wait timeout: 0
Note: Timeout values can be set under Device Settings
in Windows 2000 and NT.
15. Click OK. The Printer Properties window closes.
Configuring the PPD for Windows 95, 98, Me, 2000, or NT
4.X
If you selected Yes to configure your printer in “Installing AdobePS
4.4 and the Printer PPD,” some of the following PPD options are set
already. In this case, simply verify those settings and make any new
ones required in this procedure.
1. Select Start: Settings: Printers. The Printers window appears.
2. Highlight your printer model and click the right mouse button.
Select Properties from the drop-down menu.
3. Click the Device Options tab (Windows 95, 98, or Me) or the
Device Settings tab (Windows 2000 or NT 4.X). Then, make
the following changes for options installed on your printer (fig.
4.16) using the appropriate following procedure.
Windows 95, 98, or Me: highlight the option in the Installable
Options section; then select the setting under Change Setting.
Windows 2000: highlight the option. Then if a drop down
menu arrow is available by the current option setting, click it
and select the desired setting. Otherwise, select the current
option setting and select the desired setting from the drop
down menu that appears.