Xante Colour ScreenWriter, User Manual

Page: 286 / 446

9-20 Maintenance and Specifications bb ________________________
9. Close the LFU metal coupler 2 by rotating it clockwise (fig.
9.22); then, lay the LFU cable back up on the LFU in the
sloped area where it comes out to prevent damage when the
unit is stored (fig. 9.21).
10. Repack the LFU in its original packing materials, making sure
to include the 2 side covers, metal coupler 1, and the media
cassette.
Note: If you are not shipping the LFU, store it in a location
that meets the guidelines in “Storing the Printer”
earlier in this chapter.
Packing the Printer
If you no longer have your printer’s original packing materials, you
can order a replacement set. Contact either XANTÉ Customer
Support (800-540-7091 in the US or Canada or 334-473-6502
elsewhere) or your XANTÉ vendor.
1. Make sure all the printer’s covers are closed completely.
Warning! The printer weighs approximately 101 lbs (46 kg)
without toner, cassettes, and media installed.
Always
have two people lift the printer by the recessed grip
areas on the bottom sides.
2. Lift the printer with the help of another person and place it
back into its plastic protective bag. Then, set the printer on the
base of its carton.