manualshive.com logo in svg

Xante Colour ScreenWriter, User Manual

The Xante Colour ScreenWriter is a versatile device that allows users to create vibrant and high-quality prints. For detailed instructions on how to maximize its features, download the free User Manual from manualshive.com. This comprehensive manual will guide you through the setup and operation of the ScreenWriter.

Share
Download
background image

_________________________  Maintenance and Specifications  9-25

4.

Remove the new fuser unit from it’s package, align it over the
printer, and lower the unit straight down into the printer.
Tighten the thumbscrews to secure the unit in place (fig. 9.28).

5.

Install a fuser oil bottle. See “Installing or Replacing the Fuser
Oil Bottle” in chapter 2.

Note:

If you are going to use the oil bottle from the fuser unit
that you removed, make sure to transport the bottle
keeping a blank sheet of paper under it to prevent oil
drips from damaging your printer.

6.

Close the printer’s top and front covers. If you are not cleaning
other areas, reconnect the power cord; then, turn on the printer.

Replacing the Toner Waste Pack

A front panel status message will alert you when the toner waste
pack needs to be replaced. This is usually after running
approximately 18,000 single-sided copies.

To replace the toner waste pack

1.

Open the front cover (9.29).

Toner Waste Pack

Fig. 9.29  Replace the Toner Waste Pack

Summary of Contents for Colour ScreenWriter































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Colour ScreenWriter

Samsung CJX-1050W Quick Install Manual preview
CJX-1050W
Brand: Samsung Pages: 2
TallyGenicom 6300 Series Maintenance Manual preview
6300 Series
Brand: TallyGenicom Pages: 175
Xerox WorkCentre 7800 series Quick Reference Manual preview
WorkCentre 7800 series
Brand: Xerox Pages: 14
Xerox WORKCENTRE 7775 Specifications preview
WORKCENTRE 7775
Brand: Xerox Pages: 15
Xerox WORKCENTRE 7775 Evaluator Manual preview
WORKCENTRE 7775
Brand: Xerox Pages: 24
Xerox WORKCENTRE 7755 Betjeningsvejledning preview
WORKCENTRE 7755
Brand: Xerox Pages: 252
Xerox WORKCENTRE 7755 Specifications preview
WORKCENTRE 7755
Brand: Xerox Pages: 15
Xerox WORKCENTRE 7755 Information Manual preview
WORKCENTRE 7755
Brand: Xerox Pages: 40
Xerox WorkCentre 5019 Network Addendum preview
WorkCentre 5019
Brand: Xerox Pages: 50
Xerox versalink C7020 Quick Use Manual preview
versalink C7020
Brand: Xerox Pages: 20
Xerox WorkCentre 4265 Information preview
WorkCentre 4265
Brand: Xerox Pages: 4
Xerox VersaLink C405 Firmware Installation Instructions preview
VersaLink C405
Brand: Xerox Pages: 4
Xerox PHASER 8560MFP User Manual preview
PHASER 8560MFP
Brand: Xerox Pages: 281
Xerox Phaser 8510MFP Advanced Features Manual preview
Phaser 8510MFP
Brand: Xerox Pages: 100
Xerox Synergix 8830 Service Manual preview
Synergix 8830
Brand: Xerox Pages: 629
Xerox Phaser 7760 Evaluator Manual preview
Phaser 7760
Brand: Xerox Pages: 20
Xerox WORKCENTRE C2424 Feed Roller Kit Replacement preview
WORKCENTRE C2424
Brand: Xerox Pages: 2
Xerox Synergix 8850 Operator'S Manual preview
Synergix 8850
Brand: Xerox Pages: 61

Brands by name

Popular brands

Load more brands