Xante Colour ScreenWriter, User Manual

Page: 77 / 446

_____________________________________ Macintosh Setup 3-17
c. Select the highest resolution available on your printer.
7. Click OK twice. The Chooser window reappears; then, close
this window.
Note: When you add a printer from the network, go through either
the Auto Setup or manual setup procedure to ensure that the
printer is recognized by the network.
Configuring the Printer
If necessary, configure the printer’s communication interface using
the front panel. See Chapter 6, “Configuration,” for details.
1. Select the
SETUP: I/F
menu.
2. Select the menu for the printer interface connected to your
computer (
LOCALTALK
or
ETHERTALK
).
3. Select the
ENABLE
menu. Then, select
YES
.
4. Press the Online key until
READY/IDLE
appears.
5. Verify the setup.
a. Make sure your Macintosh is connected to the printer
with a LocalTalk or Ethernet cable.
Note: Power Mac G3 and G4 computers and iMac
computers do not have LocalTalk ports.
b. Double-click the XANTÉ Command Center icon in the
XANTÉ Utilities folder.
c. Choose General: Printer Status. A dialog box displays
the current printer status.
Note: If the status dialog box does not appear, check
all cable connections and be sure the printer
interface you are using is enabled on the printer.