Xante Colour ScreenWriter, User Manual

Page: 302 / 446

9-36 Maintenance and Specifications bb ________________________
6. Vacuum the printer’s interior area using a computer vacuum
with a soft brush attachment. Then, use the cotton cloths to
wipe out any remaining dirt.
Caution : Do not pull out any wires while performing this step.
7. Keep the fuser unit level, align it over the printer, and lower
the unit straight down into the printer. Tighten the
thumbscrews to secure the unit in place (fig. 9.38).
8. Align the OPC belt cartridge with the OPC guides and lower it
into the printer until you feel a slight resistance as the
cartridge’s gear engages with the gear in the printer (fig. 9.36).
Then, pivot the OPC guides back down into their original
positions.
9. Align one of the toner cartridges with its color bay slot and
slowly slide the cartridge in until it stops, seating firmly in
place (fig. 9.34). Repeat this process with each of the other
three toner cartridges.
10. Close the printer’s top and front covers. If you are not cleaning
other areas, reconnect any interface cables and the power cord;
then, turn on the printer.
Exterior Cleaning
Required tools: • Several clean, dry, lint-free cotton cloths
• Water or a mild detergent
Caution: Use only water or a mild detergent and clean, dry,
lint-free cotton cloths for cleaning. To prevent
discoloration, cracking, and deformation of the
case, never use alcohol, ammonia-based cleaners,
or other volatile cleaners on or around the printer.
Never spray or pour solutions directly on the
printer. Always put the solution on the cloth and
wipe the printer with the cloth.
1. Turn off your printer and disconnect it from the power source.