Unox BakerTop XBC 1005, Instruction Manual

Page: 28 / 338

English
The digital control panel used in ChefTop™ - BakerTop™ ovens is designed to offer a straightforward interface
between the oven and the outside world, by means of existing communication systems and those to be used in the
future: USB, Bluetooth, serial port etc.
The USB XC236 interface kit can be used to carry out the following functions:
• entering cooking programs
• modifying operating parameters (e.g. probe calibration)
• diagnosing malfunctions
• storing oven cavity or blast chiller temperature changes in the memory of the appliance (data required for the HACCP system)
Further information is supplied with the kit.
Warning messages:
When a malfunction is detected which allows the appliance to continue operating, abeit in a limited manner, a
WARNING message is displayed.
The device continues to run and the WARNING message remains on the display until the
button is pressed.
Warning messages oven:
Display message Description Effect Problem solution
WF01
An error has been detected in the data recorded by
cavity probe 1 The oven contines to operate, using the data
from cavity probe 2 only
Contact the Customer Assistance Service
WF02
An error has been detected in the data recorded by
cavity probe 2 The oven contines to operate, using the data
from cavity probe 1 only
Contact the Customer Assistance Service
WF03
An error has been detected in the data recorded by
the core probe
It is not possible to set steps or activate
programs which use the core probe; if a step
which uses the core probe is in progress, the
following step will begin
Contact the Customer Assistance Service
WF04
Non correct fan rotation speed Turn off the motor breaking system Contact the Customer Assistance Service
WF05
An error has been detected in the cooling system for
the electronic components The cooling fan for the electronic components
may not work
Contact the Customer Assistance Service
WF06
The temperature of the oven power P.C.B. is too
high There is a risk of permanent
damage to the power P.C.B.
Make sure the positioning standards
specified in the installation manual have
been observed. Contact the Customer
Assistance Service
WF08
Gas board detected while the oven is set as electric
The oven keeps on working but is controlled
as electric
Contact the Customer Assistance Service
WF09
Error on the motor breaking system
The oven keeps on operating but the motor
breaking system is not working
Contact the Customer Assistance Service
WF10
Non basic power board setting error
The oven keeps on working (with some
limitations due to the setting involved on the
error)
Contact the Customer Assistance Service
WF11
Not correct temperature on the gas board The oven keeps on operating Contact the Customer Assistance Service
WF12
Too high temperature on the external thermocouples
board
The oven keeps on operating Contact the Customer Assistance Service
WF13
The external sous-vide probe takes non correct data
The oven keeps on working but it is not possible
to use external sous-vide probe
Contact the Customer Assistance Service
WF14
Error on the data taken by the Multi.point core probe
(totally not working) The oven keeps on working but it is not possible
to use cooking programs with the core probe
Contact the Customer Assistance Service
WF15
Error on the board-thermocouples communication
system The oven keeps on working but it is not possible
to use external sous-vide probe
Contact the Customer Assistance Service
WF17
Error on the data taken by the Multi.point core probe
(partially not working) The oven keeps on working but the core
temperature may be not precisely taken
Contact the Customer Assistance Service
28
Oven-user communication