Unox BakerTop XBC 1005, Instruction Manual

Page: 21 / 338

English
BakerTop
™
ChefTop
™
21
Operation using programs
The ChefTouch/BakerTouch electronic control panel allows the user to save up to 99 cooking
programs, each assigned with a name up to 25 letters long.
Access the programming menu by pressing the button;
Select the location in which you wish to save the program (from P01 to P99) using the
-
+
-
buttons indicated
on display 5; press and use the
-
+
-
buttons to select the first letter of the name as desired;
Press
again and use the
-
+
-
buttons to select the second letter;
Repeat this procedure for subsequent letters;
Finally, press the
button to select the oven preheating temperature. The text "PRE" will appear;
Use the
button to select either an absolute preheating temperature
or a temperature
pp
difference
between the preheating value and the value for the first cooking step of program;
Use
-
+
-
to set the desired value, expressed in degrees;
Press the button to move to the next step and set the desired operating parameters (Duration, Core
Temperature, Cavity Temperature, Delta T, Climate) for the step;
Press the
button and set the parameter governing airflow speed inside the oven cavity;
Press and hold the button for 5 seconds to store the program in the memory (after 5 seconds a confirmation
beep will sound).
Using saved programs:
Access the programming menu by pressing the button;
Press the
-
+
-
buttons until the number correpsonding to the desired program appears on display 5;
Press the button to start the selected program;
Press the button again to stop the program.
N.B.
When a saved cooking program is started, the oven preheats automatically to the setted preheating temperature.
When a cooking program is started, the oven begins the set preheating step. During this step, all the LEDs
and displays remain off except the "START / STOP" LED, display 2 (which shows the text "PRE") and display 4
(which indicates the program being used). When the desired temperature has been reached and is maintained,
the oven beeps and the data corresponding to the first cooking step appears on the display. After the door has
been opened, the food placed inside and the door closed again, the cooking program begins automatically.
User programming procedures
SHORT WASHING
LH2O WASHING
COOL
SEMI-AUTO WASHING
RESTART
LAST P
P01 P02
...
P99
MED WASHING
LONG WASHING PUMP LOADING
P
- +