ThermoFisher Scientific thermo scientific imPULSE S.U.M., User Manual

Page: 3 / 184

Thermo Scientific
Contents
3.4 Configuring modules 40
3.4.1 Alarms and interlocks 40
3.4.2 Configuring the Agitation module 41
3.4.3 Configuring the Mass module 45
3.4.4 Configuring the Timer module 50
3.4.5 Configuring the PCD module 50
3.4.6 Configuring the BPC Pressure module 55
3.4.7 Configuring the Pumps module 59
3.4.8 Configuring the Fill module 62
3.4.9 Configuring the Harvest module 66
3.4.10 Configuring the Temperature module 70
3.4.11 Configuring the pH module 76
3.4.12 Configuring the Conductivity module 82
3.4.13 Configuring the Liquid Pressure module 87
3.4.14 Configuring the Auxiliary Output module 92
3.4.15 Configuring the Auxiliary Input module 94
Chapter 4 Calibration procedures 99
4.1 Calibrating pumps 100
4.2 Calibrating pH 101
4.3 Calibrating conductivity 102
4.4 Calibrating agitation speed 104
4.5 Calibrating mass 104
4.6 Calibrating PCD pressure 105
4.7 Calibrating BPC air pressure 105
4.8 Calibrating liquid pressure 106
4.9 Calibrating temperature 106
Chapter 5 BPC loading instructions 107
5.1 General handling guidelines 108
5.1.1 BPC preparation and setup 108
5.1.2 BPC handling instructions 108
5.1.3 Working volume 108
5.1.4 Liquid transfer 108
5.1.5 Dispensing 108
5.2 BPC loading 109
5.2.1 Preparing to load 109