Thermo Scientific
imPULSE S.U.M. with Touchscreen Console User’s Guide
|
88
Chapter 3
|
Touchscreen Console setup
Figure 3.67. Liquid Pressure Sensor Units screen.
1. By default, the units are set to PSI. To change the units, touch the
Units
field.
2. On the screen that appears, select the units you would like
the Touchscreen Console to use. You may select
PSI
or
mbar
(Figure 3.67).
– The Liquid Pressure Module Configuration screen will reappear
and your selected units will be displayed in the
Units
field.
Optional fields
High and Low alarms
Choose to enable or disable High and/or Low alarms. These alarms
provide a visual alert on the display when conditions are outside of
specified operating parameters.
1. If you would like to set High/Low alarms for liquid pressure, touch
the
High and Low alarms
field. On the screen that appears, there
are separate sections for both High and Low alarms (Figure 3.68).
