Thermo Scientific
imPULSE S.U.M. with Touchscreen Console User’s Guide
|
93
Chapter 3
|
Touchscreen Console setup
Figure 3.72. Selecting a module to duplicate.
2. The Auxiliary Output Module Configuration screen should reappear,
with the required and optional fields of the module you are
duplicating. See the module configuration section for the module
you are duplicating (sections 3.5.2 to 3.5.12) for information about
all of the associated fields.
Other required fields
The required fields for Auxiliary Output modules will vary, depending
on the module you have selected to duplicate. Before configuring
an Auxiliary Output module, become familiar with the module you
will be duplicating (sections 3.5.2 to 3.5.13). These sections provide
information about each module’s required and optional fields.
1. Touch
Scaling
to enter the RPM values you would like the
Touchscreen Console to display after converting from the output
signal (in mA).
2. Touch a field to change the value and touch
Enter
to confirm.
3. When you are finished, touch
Done
.
4. After a moment, a confirmation screen will appear. Touch
Done
to
return to the Pump Module Configuration screen—the values in the
RPM scaling field will reflect your changes.
Optional fields
There are no optional fields for the Aux Out module.
