Thermo Scientific
imPULSE S.U.M. with Touchscreen Console User’s Guide
|
122
Chapter 5
|
BPC loading instructions
Figure 5.40. Attaching plastic probe clip.
Figure 5.41. Probe insertion.
Figure 5.42. Collapsed bellows.
2. Insert the probe by collapsing the bellows (Figures 5.41 and 5.42).
Note:
If the BPC is already filled with liquid, the best practice is to
squeeze the bellows to expel air prior to collapsing it. Then insert the
probe fully, as described.
3. Position the probe clip in the desired horizontal location. Lift the
probe and set it into the probe clip (Figure 5.43).
Figure 5.43. Setting the probe intor the probe clip.
