Thermo Scientific
imPULSE S.U.M. with Touchscreen Console User’s Guide
|
71
Chapter 3
|
Touchscreen Console setup
Figure 3.44. Temperature Module Configuration screen.
Required fields
Active temperature sensor
Select the temperature sensor you would like to make active.
1. Touch the
Active temperature sensors
field.
2. On the screen that appears, select the temperature sensor
you would like to make available for use. You may select either
Temperature1
or
Temperature2
.
3. Touch
Done
when you are finished.
Note:
You can change the active sensor at any time by touching
the top of the Temperature panel and selecting
Select active
sensor
.
4. The Temperature Module Configuration screen will reappear.
TCU setpoint limits (for systems using a TCU)
Enter the maximum and minimum temperature values you would like to
use (in °C).
1. Touch the field next to
TCU set point limits
.
2. On the screen that appears, enter your desired maximum and
minimum agitation setpoint limits (in °C).
3. After entering the setpoint limits, touch
Done
.
