Thermo Scientific
imPULSE S.U.M. with Touchscreen Console User’s Guide
|
84
Optional fields
High and Low alarms
Choose to enable or disable High and/or Low alarms. These alarms
provide a visual alert on the display when conditions are outside of
specified operating parameters.
1. If you would like to set High/Low alarms for conductivity, touch the
High and Low alarms
field.
2. On the screen that appears, there will be separate sections for both
High and Low alarms (Figure 3.63). To set the High or Low alarm,
move the corresponding slider to the
On
position.
3. Touch the High or Low field and enter the mass value in the
adjacent field that will trigger the High or Low alarm.
Figure 3.63. Conductivity High and Low Alarms screen.
4. Touch
Enter
to confirm and return to the previous screen.
5. After you have entered the High and Low alarm values, touch
Done
.
6. The system will confirm the settings. Touch
Done
again to return to
the Conductivity Module Configuration screen where the High and
Low alarm values that you entered will be displayed in the field.
Chapter 3
|
Touchscreen Console setup
