Thermo Scientific
imPULSE S.U.M. with Touchscreen Console User’s Guide
|
77
Chapter 3
|
Touchscreen Console setup
3. When you are finished, touch
Done
. The pH Module Configuration
screen will reappear—the sensor(s) you selected wil be visible in the
pH Sensors Available
field.
Active pH sensor
Select the pH sensor you would like to make active. You may select
either pH1 or pH2.
1. Touch the
Active pH Sensor
field.
2. On the screen that appears, select the pH sensor you would like to
make active (Figure 3.55). You may select either
pH1
or
pH2
.
Figure 3.54. pH Sensors Available screen.
Figure 3.55. pH Module Select Active pH sensor
screen.
