Thermo Scientific
imPULSE S.U.M. with Touchscreen Console User’s Guide
|
45
Chapter 3
|
Touchscreen Console setup
Figure 3.15. Mass Configuration screen.
6. After a moment, a confirmation screen will appear. Touch
Done
to return to the Configuration screen—the values in the
High High
and Low Low
field will reflect your changes.
Calibration
Set up one-point agitation calibration to determine the accuracy of
agitation readings.
1. If you would like calibrate agitation, touch
Calibration
.
2. Follow the calibration instructions in Chapter 4—Calibration
Procedures.
3. Touch
Done
to return to the Home screen.
3.4.3 Configuring the Mass module
Use the following information and steps to configure the Mass module.
To begin, locate the Mass module on the Touchscreen Console Home
screen, and then touch
Configure
. The Mass Module Configuration
screen will appear (Figure 3.15).
Note:
You can touch
Done
at the bottom of the Configuration screen
at any time to save your current settings and so you can resume later.
