Thermo Scientific
imPULSE S.U.M. with Touchscreen Console User’s Guide
|
154
Chapter 8
|
Specifications and parts information
Table 8.5. 1,000 L imPULSE S.U.M. specifications.
Specification
Gen
er
al
Unit dimensions (D x W x H)
158.43 x 153.82 x 234.88 cm (62.37 x 60.56 x 92.47 in.)
Dimensions with optional BPC hoist (D x W x H)
158.43 x 173.79 x 364.68 cm (62.37 x 68.42 x 143.57 in.)
Nominal working volume
1,000 L
Maximum working volume
1,136 L
Volume at probe belt
94.34 L
Minimum startup working volume
10%
Minimum drain working volume
0 L
Dry unit weight
928 kg (2,047.8 lbs)
Wet unit weight (nominal working volume)
1,960.43 kg (4,321.98 lbs)
Maximum noise level
< 78 dB at 1 m
Motor load max
7.2 A at 460 V (5 hp)
Electrical power supply requirement (U.S. systems)
AC motor module:
25 A, 400–480 VAC, 50–60 Hz
TSC:
15A, 100-120/208-240 VAC, 50-60 Hz
BPC hoist:
12A, 100-120 VAC, 50-60 Hz; or 12A, 208-
240 VAC, 50-60 Hz*
Maximum temperature in vessel
40°C
In
fla
tio
n/
co
ve
r g
as u
tili
ty
re
qu
irem
en
ts
Maximum inflation operation air pressure
PCD:
80 psi
TSC:
95 psi
Temperature
Ambient
PCD inlet air connection
3/8 in. OD, push-to-connect tube
TSC inlet air connection
5/16 in. OD, push-to-connect tube
Process air pressure
30 psig**
Instrument air pressure
Regulate incoming air according to instrument specifications
Filtration
Disposable filtration integrated with optional tube sets
W
at
er u
tili
ty
re
qu
irem
en
ts
Jacket Flow rate
10–45 L/min.
Jacket Maximum temperature
50°C***
Jacket Minimum temperature
0°C
†
Connection inlet
3/4 in. NPT Quick Connect—SH6-63Y Male
Connection outlet
3/4 in. NPT Quick Connect—SH6-62Y Female
Ag
itat
io
n
Mixing disc diameter
48.3 cm (19 in.)
Mixer stroke
20.3 cm (8 in.)
Vessel turnover
74.34 L/sec. (13.5 total sec.)
Motor speed
0–2 Hz
*Depending on specified hoist input voltage.
**For manual inflation.
***The vessel jacket can be operated at 50°C until the BPC reaches 40°C, after which, the vessel jacket temperature must be lowered.
†
The vessel jacket can be operated at 0°C until the BPC approaches 5°C, after which, the vessel jacket temperature must be raised to match.
