Thermo Scientific
imPULSE S.U.M. with Touchscreen Console User’s Guide
|
28
Notes:
• To allow visibility of the port labels while you are making
connections, we recommend to begin plugging cables into the
Touchscreen Console ports starting at the bottom, and working
your way upward.
3. Connect all electrical plugs to facility power. Refer to hardware/
electrical labels and schematics to ensure proper electrical voltage
is connected to the S.U.M.
Make all other connections
1. Use the supplied tool (Figure 2.28) to connect any communication
cables you will be using (temperature sensor, pH sensor, pressure
sensor, conductivity sensor, load cells, etc.) to the input ports on
the back of the Touchscreen Console (Figure 2.29).
Figure 2.26. Location of the interlock
communication ports.
Figure 2.27. Interlocks on the
drive box.
Chapter 2
|
Hardware installation
2. Ensure the safety sensor cables are firmly connected to the AC
motor module (Figure 2.26). Two interlocks are located on each
side of the motor drive box (Figure 2.27), and one is located on the
vessel door.
Figure 2.28. Supplied tool for
connecting communication cables.
Figure 2.29. Connecting communication
cables to the Touchscreen Console.
