Thermo Scientific
imPULSE S.U.M. with Touchscreen Console User’s Guide
|
133
Chapter 6
|
Operating information
6.6.6 Monitoring other functions
The Touchscreen Console can be used to monitor other functions
outside of the provided modules. The Auxiliary Output and Auxiliary
Input modules described below, allow you to customize functions
they would like to monitor during the mixing process. In addition,
Administrators can access a “Diagnostics” option on the Pump and pH
module settings.
Auxiliary outputs
The Auxiliary Output module allows you to duplicate an existing
module, for extra sensors or further redundancy. To monitor any
configured auxiliary outputs during operation, touch the Auxiliary
Output module on the Home screen of the Touchscreen Console. After
selecting a module to duplicate, you can select diagnostics, and adjust
RPM scaling.
Auxiliary inputs
The Auxiliary Input module allows you to monitor sensors and
transmitters that use a 4-20 mA signal, and do not have a specified
module on the Touchscreen Console.
Pump and pH diagnostics
Administrators can access the “Diagnostics” option for the Pump and
pH modules. Pump Diagnostics allows the Administrator to manually
set the output current of the Pump output. This can help determine
the current to RPM values for RPM scaling. pH Diagnostics allow the
Administrator to view the slope and offset calibration values currently
applied to the pH sensor(s).
Resolving triggered alarms
To resolve alarms that have been triggered, touch the alarm icon on
the Touchscreen Console Home screen to open the Alarm Status
screen. Touch the alarm that has been triggered (or touch
Select All
to
acknowledge all alarms at once), and then touch
Acknowledge
. The
buzzer should stop, and the alarm icon and affected module should
change from red back to white.
