ThermoFisher Scientific thermo scientific imPULSE S.U.M., User Manual

Page: 70 / 184

Thermo Scientific imPULSE S.U.M. with Touchscreen Console User’s Guide | 65
Chapter 3 | Touchscreen Console setup
2. Touch the drop down for either Start or Stop and select the
condition that will either start or stop the pump (Figure 3.37). Refer to
Table 3.3 for Start and Stop condition options.
3. Touch Done to proceed to the next screen. The screen that
appears will display fields for the steps of the filling process
(Figure 3.38).
Table 3.3. Fill Control Start and Stop conditions.
Start Description Stop Description
Mass
Starts filling when the mass in vessel
reaches a specified value
Fill delivered
Stop filling when the specified Fluid
target is reached (see step 4)
Previous step
complete Starts filling when the previous step
completes filling
AuxIn1 N/A
None
Starts filling when operations begin
AuxIn2
Use the readings from the device in
the Auxiliary 2 port to stop filling.
AuxIn1
N/A
AuxIn2
Uses the readings from the device in the
Auxiliary 2 port to start filling.
Pause for this
step Pauses after the previous step completes
and waits for user input to start filling
Figure 3.37. Fill Start and Stop condition screen.