Thermo Scientific
imPULSE S.U.M. with Touchscreen Console User’s Guide
|
19
4. After inserting the screw jack, use an adjustable wrench to raise the
screw jack by turning clockwise (Figure 2.5).
Figure 2.5. Using adjustable wrench to raise
jack.
5. Once the load cell is raised enough, remove the large locking plate
(Figure 2.6). Then lower and remove the screw jack.
Figure 2.6. Removing large locking plate.
Chapter 2
|
Hardware installation
Figure 2.4. Inserting small screw jack over the
top of the bolt.
