Thermo Scientific
imPULSE S.U.M. with Touchscreen Console User’s Guide
|
92
Chapter 3
|
Touchscreen Console setup
3.4.14 Configuring the Auxiliary Output module
Use the following information and steps to configure the Auxiliary
Output module. To begin, locate the Auxiliary Output module on the
Touchscreen Console Home screen, and touch
Configure
. An Auxiliary
Output Module Configuration screen will appear (see Figure 3.71).
Note:
You can touch
Done
at the bottom of the Configuration screen
at any time to save your current settings and so you can resume later.
Figure 3.71. Aux Out Module Configuration screen.
Required fields
Sensor value to duplicate
Select the type of sensor value you would like to duplicate. You may
select any of the modules available on the Touchscreen Console,
except Auxiliary Input.
1. Touch the
Sensor value to duplicate
field. On the screen that
appears (Figure 3.72), touch the module you would like to duplicate.
Then, touch
Done
.
