Telstra Commander i, Service Manual

Page: 80 / 195

Programming
Commander i+ Product Service Manual - Issue 2 Page 4-23
At least one of the other stations on the bus is a master
station.
Bus Free Bus Controller OK
There is no other station on the bus that is a master
station.
Bus Malfunction Bus Controller faulty.
•
Dial 2 to test the internal non volatile memory (EEPROM)
.
Memory status, station type and station number are displayed. For
example, OK Master 1 for a master station number 1 or OK basic 3
for standard station number 3.
Memory Status
OK
- internal memory OK.
Clear - all programming in the station is factory default.
NOK - memory error.
•
Dial 3 to go to the next diagnostic menu or press [RLS] to exit from
the Diagnostic Test Sequence.
To Clear the Station Number and Reset Non Volatile Memory:
•
Dial 1 to clear the station number.
The new station number will be requested when you exit the test
phase.
•
Dial 2 to reset the internal non volatile memory EEPROM and
recover the default configuration. For a standard station, only the
personal speed dial numbers will be cleared.
•
Dial 3 to go to the next menu or press [RLS] to exit from the
Diagnostic Test Sequence
To Display Station Software Version :
This display menu displays the station software version.
•
Dial 3 to return to the first Diagnostic menu or press [RLS] to exit
from the Diagnostic Test Sequence.
20i Help Desk ID
This facility allows the phone number of the Telstra Commander
Remote Access Centre to be entered.. This permits the Commander i+
system to automatically answer incoming calls from the Telstra
Commander Remote Access Centre.