Programming
Page 4-20
the AFU becomes fully transparent to the DTMF dialling from the
telephone terminal. This can allow, for example, a continuation of
outside DTMF dialling in transparent mode. The display shows the
current time-out in seconds (three digits).
The Default setting is: 010
•
Press [i] to display the > prompt .
•
Dial the desired timeout in seconds (you must enter three digits).
•
Press [i] to confirm. The latest setting will be displayed.
15i Timer Door
Opener
This is the time interval during which the Door Unlock (Opener)
interface remains operational, after the Door Unlock (Opener)
command has been given. The display shows the current time interval in
seconds (two digits), but the value is normally set to four or five
seconds.
The Default setting is: 05
•
Press [i] to display the > prompt.
•
Dial the desired time interval in seconds (you must enter two digits).
•
Press [i] to confirm. The latest setting will be displayed.
16i Type Door
Opener
This setting is used to select the type of door unlock (opener) interface
used with the system. Only one type of door opener is available for the
system and therefore this setting does not need to be changed.
The Default setting is: 0 and should not be changed
•
Press [i] to display the > prompt.
•
Dial 0 for Commander i /i+ type only - do not change this setting.
•
Press [i] to confirm. The latest setting will be displayed.
Setting 1 is only used in Europe.
Summary of Contents for Commander i
