Telstra Commander i, Service Manual, Page: 73 / 195

Programming
Page 4-16
•
Dial the appropriate digits for the selected line.
POS MEANING OPTIONS
1 Dial Mode 0 : Pulse 1 : Tone
2 Connect to 0 : Exchange 1 : PABX
3 Balance Impedance 0 : Long Line 1 : Short Line
4 Gain setting 0 : High 1 : Low
5
Parallel Station
① 0 : No detection 1 : Yes detection
6 Hook-Flash 0 : 110 ms/ 1 : 270 ms/ 2 : 450 ms/ 3 : 700
ms
①
Select ‘1’ if a data terminal or fax is in parallel with the external line.
This will prevent the Commander i/i+ system from seizing the shared
line when the data terminal or fax is using the line.
•
Press [i] to confirm the setting.
09i PABX Access
Digit
Two single digit PABX access codes can be assigned.
The Default setting for both locations is: 0
•
Press [i] to display the first of two PABX access digits.
•
Select the desired access digit location (01 or 02) by dialling the
number or by using the [*] and [#] keys to scroll backwards and
forwards.
•
Press [i] to display the > prompt.
•
Dial the appropriate digit (any dial key digit) for the selected PABX
access digit.
•
Press [i] to confirm the setting.
10i Music on Hold
Source
There are three types of sound that can be transmitted on held PSTN
lines; Simple Tone (I), Internal Music (M) and External Music Source
(E). The letter corresponding to the existing selection is displayed.
The Default setting is: 1 (Simple tone)