Telstra Commander i, Service Manual

Page: 15 / 195

Introduction to the Commander i+
Page 1-4
station is now programmable at the administrator level (12a). There are
four settings:
1 - 30 seconds
2 - 60 seconds
3 - 90 seconds
4 - 120 seconds
Hold Recall
Transfer Recall
Held calls or transferred calls reverting back to the holding /
transferring keystation now ring with a more urgent recall ring. The
keystation display also now indicates that the line is reverting.
Call Waiting
The call waiting tone can now be enabled / disabled by programming at
the user level (06u).
System Speed Dial
System speed dial numbers appear in locations 11 - 30 on each
keystation. They are now programmed into locations 11 - 30 at the
administrator level.
Incoming Call
Display
Incoming calls are now indicated on the keystation display as follows:
Intercom calls External Calls
Line 1 reverting
Stn 2 ringing Line 1 ringing