Telstra Commander i, Service Manual

Page: 70 / 195

Programming
Commander i+ Product Service Manual - Issue 2 Page 4-13
2 Two AFU ports (1 AFU only)
4 Four AFU ports (2 AFUs)
•
Press [i] to confirm.
03i Number of
External PSTN
Lines
The current number of external PSTN lines connected to the system is
displayed.
The Default setting is: 4
To change this number:
•
Press [i] to display the > prompt.
•
Dial the number of external lines connected to the system.
•
Press [i] to confirm.
The maximum number of simultaneous conversations on the system
bus is 5 (4 external and 1 intercom, or 2 external and 3 intercom).
The correct setting of External Lines is therefore important as each
external line reduces the number of simultaneous intercom
conversations.
04i Barred ISD
Prefixes
Ten ISD and high charge information prefixes can be stored on the
system. Any station that is assigned a Call Barring Class of 1, 2 or 3
will be barred from calling these prefixes (note that Call Barring Class 4
only permits calls to be made to common allowed prefixes).
Note: Station call barring class is assigned in administration
programming - 04a.
The Default prefixes are: 001, 14, 19, 0101, 0055, 009, *, 12
•
Press [i] to display the first stored ISD prefix.
•
Select the desired ISD prefix location (01 - 10) by dialling the
number or by using the [*] and [#] keys to scroll backwards and
forwards.
•
Press [i] to display the > prompt.
•
Dial the appropriate ISD prefix for the selected location.