Telstra Commander i, Service Manual, Page: 119 / 195

Answering Calls
Commander i System User Guide - Issue 2
External Calls
To Answer An External Call:
•
Hear the incoming ring signal
•
Lift the handset of the ringing station or lift the handset and press
flashing line key of another station.
The icon shows an incoming call on line 1.
L2
L3
1
2
3
4
L1
Each station can be programmed to have an instant ring, delayed ring or
no ring signal for any of the available lines. However, the ring mode
setting does not affect the ability of a station to answer an incoming call.
For more information on the ring mode settings refer to Administration
Programming - 09a Ring Mode - PSTN on page 6-18.
System Call Waiting
Call Waiting is available on the system for both internal and external
calls. A short tone burst is heard every twenty seconds if you are already
busy on a call and another incoming call arrives at your station.
Each keystation can be programmed to enable or disable the call waiting
tone. Refer to User Programming - 06u Call Waiting Enable / Disable
on page 6-9.
Line 1 ringing
PSTN System:
Page 2-4 Page 2-5