Telstra Commander i, Service Manual

Page: 118 / 195

Answering Calls
Commander i System User Guide - Issue 2
Intercom Calls
To Answer Intercom Calls Ringing at Your Keystation:
•
Hear the intercom ring signal.
The flashing icons below indicate an intercom call from station number
8.
REDIAL
VOL + /-
MUTE/AA
7
8
INT
HF/GL
•
Lift the handset or, to answer in handsfree, press [HF/GL], [INT] or
the [DSS] key of the calling station.
Automatic Intercom Answer
To Set Your Keystation For Automatic Intercom Answer:
•
Press [MUTE/AA] while the phone is idle to activate the automatic
answer intercom facility.
VOL + /-
MUTE/AA HF/GL
Upon receiving an incoming intercom call, the keystation automatically
answers and two-way speech is established in handsfree mode. One beep
is heard from the speaker before the speech path is connected.
Internal Paging Calls
Announcements can be made through the speakers of idle keystations
pre-programmed to receive paging calls.
To Answer A Paging Call:
•
Hear the paging call through keystation speaker.
•
Lift the handset or, to answer in handsfree, press [HF/GL], [INT] or
the [DSS] key of the calling station.
REDIAL
VOL + /-
MUTE/AA
7
8
INT
HF/GL
The icons show a paging call coming from station number 8.
Door Station Calls
To Answer A Call From The Door Station:
•
Hear the door station chime.
•
Lift the handset and speak.
•
Press [RECALL] to activate the door opener.
Door station calls will only chime at keystations programmed to receive
them.
Int Paging
Stn 8 ringing
Page 2-2 Page 2-3