TECO JSDG2S Series, User Manual

Page: 89 / 718

3-3
3-1-2 Toggle Function
When the power is on, users can use MODE key to select from 12 parameters, described as
follows, offered by this device.
Steps
Operation
Key
LED Display Screen
after Operation
Description
1
Turn on
Power
When the power is turned on, Enter the Status
Display Screen .
2
Press MODE Key once to enter Status Display
Parameters
.
3
Press MODE Key once to enter Diagnostic
Parameters .
4
Press MODE Key once to enter Error Alarm History
Parameters.
5
Press MODE Key one time to enter the System
Parameter .
6
Press MODE Key once to enter Torque Control
Parameters
.
7
Press MODE Key once to enter
Speed Control
Parameters.
8
Press MODE Key once to enter Position Control
Parameters .
9
Press MODE Key once to enter Point to Point
Position Control Parameters .
10
Press MODE Key once to enter
Shortcut
Parameters .
11
Press MODE Key once to enter Multifunction
Contact Planning Parameters .
12 Press MODE Key once to enter
CiA402 Parameters.
13 Press MODE Key once to enter Tunning Parameters.
14 Press MODE Key once to enter
E-CAM Parameters
.
15
Press MODE Key once to enter
Mapping
Parameters Value Display .
16
Press MODE Key once to enter Mapping
Parameters Address Setting .