TECO JSDG2S Series, User Manual

Page: 389 / 718

7-27
S
etting description:
Setting Description
0 Not used
1 The TIC function switch is an over-temperature protection signal
2 The SIC function switch is an over-temperature protection signal
Cn010 CCW Direction Torque Command Limit Value 
【
5-2-5
】

【
5-3-7
】

【
5-4-8
】
Initial Value Unit Setting Range Effective Cn029 Reset
200 ~ 300
Note)
% 0 ~ 300 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
000BH 200AH 200AH O O O O O
Setting Description: To limit the Torque Command of CCW direction with doubled Rated Torque, set Cn010=200.
Cn011 CW direction torque command limit value

【
5-2-5
】

【
5-3-7
】

【
5-4-
8
】
Initial Value Unit Setting Range Effective Cn029 Reset
-300 ~ -200 Note) % -300 ~ 0 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
000CH 200BH 200BH O O O O O
Setting Description: To limit the Torque Command of CW direction with two times the Rated Torque, set Cn011=-200.
Note) Default and setting range of parameter Cn010/Cn011 vary by driver model.
200V
JSDG2S Matching Motor
Cn030 setting value
Torque command limit value
Matching
Capacity
Motor Model Cn010(%) Cn011(%)
10A
JSMA-PSCP5A □ H101 □ 300 -300
JSMA-PUCP5A □ H105 □ 300 -300
JSMA-PSC01A □ H102 □ 300 -300
JSMA-PUC01A □ H106 □ 300 -300
JSMA-PBC01A □ H107 □ 300 -300
JSMA-PUC02A □ H108 □ 240 -240
JSMA-PBC02A □ H109 □ 240 -240
15A
JSMA-PSC01A □ H111 □ 300 -300
JSMA-PSC02A □ H113 □ 300 -300