TECO JSDG2S Series, User Manual

Page: 3 / 718

2
Attention
• When the servo driver is installed in the control panel, if the ambient temperature is too
high, please install a cooling fan.
• Do not conduct pressure resistance test on the Servo Driver.
• Before the machine starts to operate, confirm whether or not the emergency stop switch can
be started at any time to stop the machine.
• Before the machine starts to operate, the user parameter setting value must be coordinated
with the machine. Failure to adjust to the matched correct setting values may result in a
loss of control or failure of the machine.
• Before the machine starts to operate, make sure to confirm the parameter Cn030: serial
model settings, and select the correct Driver and Motor matching combination! Confirm
the parameter Cn001 control mode selection.
 Safety Pre-cautions:
Please read this Manual thoroughly before installing, operating, maintaining, and checking. Only
a professional qualified personnel can perform assembly line work.
The safety pre-cautions in the Manual are divided into two items: “Warnings” and “Pre-
cautions”.
Warnings :
Indicating a dangerous situation that may result in death or serious injury
of personnel if ignored.
Pre-cautions :
Indicating a possible hazardous situation that may result in a less serious
or minor injury of personnel and damage of machinery equipment if not
resolved.
Therefore, this Technical Manual shall be read in detail before
using this Servo Driver.