TECO JSDG2S Series, User Manual

Page: 115 / 718

4-5
Attention
• The JOG Speed operates in accordance with Sn201 (Internal Speed Command 1),
therefore, set Sn201 before executing this function.
• No matter the motor is excited by using digital input contact SON or not, it will be excited
immediately after entering JOG mode.
Steps
Operation
Key
LED Display Screen
after Operation
Description
1
Turn on
Power
When the power is turned on, Enter the
Status
Display Screen
.
2
Press MODE Key 2 times to enter
Diagnostic
Parameters
.
3 Press UP Key 4 times to select
dn-05
Item.
4
Press and hold the ENTER Key for 2 seconds to enter
JOG Mode
, and the Motor is excited immediately.
5
Press and hold the UP Key, the Motor rotates in the
currently defined positive direction.
6
Press and hold the DOWN Key, the Motor rotates in
the currently defined negative direction.
7
Press the MODE Key 1 time, to jump back to the
Parameter Selection Screen, and the Motor will
release excitation immediately. .