TECO JSDG2S Series, User Manual

Page: 535 / 718

8-30
8-2-4 CANopen Protocol
G2S CANopen contains the following protocols:


NMT(Network Mangement Object)


SDO(Service Data Object)


PDO(Process Data Object )


Special function object
Network management: used to activate network and monitor equipment (heartbeat, enable message).
In network management, the same network only allows one master node and one or multiple slave nodes
and follow the master-slave model. The equipment with network management master function is usually
called CANopen master station and usually has SDO client functions. ON the contrary, the equipment
with network management slave function is usually called CANopen slave station and must have PDO
function. In this way, CANopen master station can control the slave station and read/write the object
dictionary of CANopen slave station.
Network management NMT
1. NTM service and protocol
CANopen equipment activated and automatically enters pre-operation status after internal
initialization. Then notify NMT master of this status change incident through Boot-up. The whole
network will enter operation status when NMT master sends one CAN message. In addition, NMT
master can force the equipment into prohibition status; all other communication services are prohibited
except network management and heartbeat.