5-6 ENGINE REMOVAL AND INSTALLATION
INSTALLATION
Install the engine in the reverse order of removal. Pay attention to the following points:
• Fit the swingarm in its position and hold it with the swingarm pivot shaft.
• Mount the engine on the frame.
• Tighten the engine mounting bolts, nuts and swingarm pivot shaft nut to the specified torque.
NOTE:
After the engine has been installed and run, make sure to retighten the fasteners as they are subject to
becoming loose.
The engine mounting nut is the self-lock type and cannot be used repeatedly. If the self-lock
effect is lose, replace it with a new one.
a
Shim
ITEM
N·m
kgf-m
lbf-ft
A
45
4.5
32.5
BC
66
6.6
47.5
D
70
7.0
50.5
EF
40
4.0
29.0
LH
RH
