5-10 ENGINE REMOVAL AND INSTALLATION
• Temporarily tighten the exhaust pipe nuts
M
.
NOTE:
Degrease the stud bolts and exhaust pipe nuts
M
.
• Insert the muffler to the exhaust pipe.
• Temporarily tighten the muffler mounting front bolt
N
and rear
bolt
O
.
• Temporarily tighten the muffler connector clamp bolt
P
.
NOTE:
When installing the connector clamp, fit the convex part
I
of the
connector clamp onto the concave part of muffler.
• Check the clearance between exhausted pipe and radiator
hose.
• Be sure to tighten the bolts and nuts in the following order.
1) Muffler mounting front bolt
N
and rear bolt
O
2) Exhaust pipe nuts
3) Connector clamp bolt
P
Exhaust pipe nut: 18 N·m (1.8 kgf-m, 13.0 lbf-ft)
Muffler mounting bolt (front and rear): 23 N·m (2.3 kgf-m, 16.5 lbf-ft)
Muffler connector clamp bolt: 18 N·m (1.8 kgf-m, 13.0 lbf-ft)
INSPECTION AFTER INSTALLATION
• Engine oil level (
2-12)
• Engine coolant level and coolant leakage (
2-18, -19)
• Fuel leakage
• Exhaust gas leakage
• Throttle cable play (
2-21)
• Clutch cable play (
2-20)
• Drive chain slack (
2-30)
• Brake pedal height (
2-35)
• Wiring harness, cable and hose routing (
20-18 to -24)
