KICK STARTER 8-7
• Install the wave washer
B
with convex side inside onto the
kick starter idle shaft.
• Install the kick starter idle gear
C
.
• Reassemble the clutch component parts. (
7-9, -10)
• Install the dowel pins
D
and gasket
E
.
• Install the right crankcase cover
F
.
• Tighten the right crankcase cover bolts (
a
,
b
,
c
,
d
) to the
specified torque.
Right crankcase cover bolt: 11 N·m (1.1kgf-m, 8.0 lbf-ft)
a
Length: 30 mm (1.2 in)
b
Length: 60 mm (2.4 in)
c
Length: 65 mm (2.6 in)
d
Length: 25 mm (1.0 in)
• Install the kick starter lever
G
onto the kick starter shaft.
NOTE:
When installing the kick starter lever
G
, align the wide spline
teeth
H
and
I
.
Replace the gasket
E
with a new one.
