ENGINE REMOVAL AND INSTALLATION 5-9
• Fit the projection
F
of the throttle body to the depression of
intake pipe.
• Position the clamps
G
correctly. (
20-23)
• Install the condenser
H
.
• Align the matching mark
G
on the clutch cable
I
with the
matching mark
H
on the clutch cable bracket.
• Tighten the clutch cable bracket bolt
J
to the specified
torque.
Clutch cable bracket bolt: 6 N·m (0.6 kgf-m, 4.5 lbf-ft)
• Install the muffler joint connector
K
and exhaust pipe gasket
L
.
NOTE:
When installing a new connector
K
, clean the exhaust pipe and
joint of the muffler.
Replace the connector
K
and gasket
L
with new ones
to prevent exhaust gas leakage.
