18-26 FRONT FORK AND STEERING
• Align the matching mark
F
on the handlebars with the match-
ing surface master cylinder.
• Tighten the master cylinder holder lower bolt
G
first tempo-
rarily to provide clearance on the upper side and then tighten
both the master cylinder holder bolts
C
to the specified
torque. (
20-28)
Master cylinder holder bolt :
(Lower): 12 N·m (1.2 kgf-m, 8.5 lbf-ft)
(Upper): 10 N·m (1.0 kgf-m, 7.0 lbf-ft)
HANDLEBARS
• Apply handle grip bond
A
to the left handlebar end and inside
of the left grip.
• Align the “
” mark on the left grip with the matching mark
B
on the left handlebar end.
