GEARSHIFTING 9-5
INSPECTION
• Inspect the gearshift shaft
1
for bends and damage.
• Inspect the return spring
2
for damage.
• If necessary, replace the defective parts with a new one.
• Inspect the pawls
3
, pins
4
, springs
5
, gearshift roller
6
and gearshift cam driven gear
7
for damage.
• If necessary, replace the defective parts with a new one.
INSTALLATION
Install the gearshift in the reverse order of removal. Pay atten-
tion to the following points:
• Install the washer
1
and gearshift arm stopper
2
.
• Apply a small quantity of THREAD LOCK SUPER to the gear-
shift arm stopper
2
and tighten it to the specified torque.
99000-32030: THREAD LOCK SUPER “1303”
or equivalent
Gearshift arm stopper: 23 N·m (2.3 kgf-m, 16.5 lbf-ft)
• Install the washer
3
, spring
4
and gearshift cam stopper
5
.
• Tighten the shift cam stopper bolt
6
to the specified torque.
Shift cam stopper bolt: 10 N·m (1.0 kgf-m, 7.0 lbf-ft)
