9-8 GEARSHIFTING
GEAR POSITION (GP) SWITCH
REMOVAL
• Drain engine oil. (
2-13)
• Remove the seat, radiator covers and fuel tank.
(
5-2, 13-2, -3)
• Disconnect the GP switch lead wire coupler
1
.
• Remove the GP switch lead wire from the clamp
2
.
• Remove the engine sprocket cover
3
and front chain guide
plate
4
.
• Remove the clamps
5
.
• Remove the GP switch
7
by removing its bolts
6
.
• Remove the O-ring
8
, switch contacts
9
and springs
0
.
INSPECTION
Refer to page 12-52, -53 for details.
INSTALLATION
Install the gear position switch in the reverse order of removal.
Pay attention to the following points:
• Install the springs
1
and switch contacts
2
.
• Fit the new O-ring
3
to GP switch
4
and apply grease to it.
99000-25010: SUZUKI SUPER GREASE “A”
or equivalent
Replace the O-ring
3
with a new one.
