8-4 KICK STARTER
• Remove the wave washer
9
.
• Unhook the end of return spring
0
.
• Remove the kick starter shaft assembly
A
.
• Remove the following parts from the kick starter shaft assem-
bly
A
.
Starter shaft
B
Washer
G
Return spring
C
Snap ring
H
Spring guide
D
Spring
I
Washer
E
Kick starter
J
Kick starter drive gear
F
09900-06107: Snap ring remover (Open type)
• Remove the kick starter guide
L
by removing its bolt
K
.
INSPECTION
• Inspect the oil seal lip
A
for wear and damage.
• If any defects are found, replace the oil seal with a new one.
• Inspect the kick starter drive gear teeth for damage.
• Inspect the kick starter drive gear ratchet part for wear and
damage.
• Inspect the kick starter shaft and drive gear for contact sur-
face wear.
• Inspect the return spring for damage.
• If necessary, replace the defective parts with a new one.
