FRONT AND REAR BRAKES 17-15
• Remove the dust boot
8
and snap ring
9
.
09900-06108: Snap ring remover (Close type)
• Remove the washer
0
and piston/cup set
A
.
MASTER CYLINDER INSPECTION
• Inspect the cylinder bore
A
and piston
B
for scuffing, wear
and damage.
• Inspect the piston
B
and spring
C
for damage.
• If necessary, replace the defective parts with a new one.
MASTER CYLINDER CLEANING
• Flush the master cylinder ports with pressurized air.
• Wash the master cylinder bore and piston with fresh brake
fluid.
Specification and classification: DOT 4
NOTE:
Do not use gasoline or other cleaning solvents to wash the mas-
ter cylinder parts.
