ENGINE REMOVAL AND INSTALLATION 5-5
• Remove the master cylinder rod pin
X
.
• Remove the brake pedal pivot bolt
Y
and return spring
Z
.
• Remove the kick starter lever
\
by removing its bolt
[
.
• Remove the gearshift lever
]
. (
9-3)
NOTE:
Mark
A
the gearshift shaft head at which the gearshift lever slit
set for correct reinstallation.
• Remove the engine sprocket cover
^
and front chain guide
plate
a
.
• Remove the drive chain clip
b
, and release the drive chain
c
.
• Remove the snap ring
d
and engine sprocket
e
.
09900-06107: Snap ring remover (Open type)
• Remove the engine mounting upper brackets
g
by removing
their bolts and nut
f
.
• Remove the engine mounting front brackets
i
, by removing
their bolts and nuts
h
.
NOTE:
Do not lose the shim between left engine mounting front bracket
i
and engine.
• Remove the engine mounting bolt and nut
j
.
• Remove the swingarm pivot shaft nut
k
and washer
l
.
• Extract three quarters of the swingarm pivot shaft
m
so as to
keep the swingarm in position.
NOTE:
The swingarm will come off when the swingarm pivot shaft
m
is
completely removed.
• Remove the engine from the frame.
